All Issue

2022 Vol.12, Issue 2 Preview Page
Building waste management plan using BIM and RFID technology

BIM과 RFID 기술을 활용한 건설 폐기물 관리 방안

Chen Duan1
,
Ie-sle An2
,
Nam-Hyuk Ham3*
,
Jae-Jun Kim4
단 신1
,
안 이슬2
,
함 남혁3*
,
김 재준4
1학생회원, 한양대학교 건축공학과 석사과정
2학생회원, 한양대학교 건축공학과 박사과정
3정회원, 한양사이버대학교 디지털건축도시공학과 조교수
4정회원, 한양대학교 건축공학과 교수
*Corresponding Author
30 June 2022. pp. 26-39
PDF XML Citation
Abstract

The purpose of this study is to establish a novel system for on-site management of construction and demolition waste. Construction waste has always been one of largest waste in the world and has long lacked an effective management system. Although various countries have planned the disposal of waste at the political level, the real-time and effective management of construction sites has not been mentioned. Especially in China, the continuous development of the construction industry also generates a large amount of waste, and China is not prepared for a large amount of construction waste. In order to alleviate the huge impact of construction waste on society and the environment, this study proposes a waste management method that combines Building Information Modeling technology and Radio Frequency Identification technology. Through this research, by using information technology to manage the generation and discharge of construction waste, and record the amount and information of waste generation, also improve the management method of construction waste.

Keywords
BIM
Demolition Construction
Construction Waste
RFID technology
CDW
키워드
BIM
철거 공사
건설 폐기물
RFID 기술
CDW
References
1
Aslam, M. S., Huang, B., Cui, L. (2020). Review of construction and demolition waste management in China and USA. Journal of environmental management, 264, p. 110445. 10.1016/j.jenvman.2020.11044532217323
2
Chen, X. (2019). Optimization of MOPSO-based construction waste recycling network. (Doctoral dispersion, Xi’an University of Architectural Science and Technology).
3
Chang, C. G., Wu, F. F. (2015). Construction process management of prefabricated buildings based on bim and rfid technology. Journal of Shenyang Jianzhu University (Social Science Edition), 017(002), pp. 170-174.
4
Cheng, M. Y., Chang, N. (2011). Radio frequency identification (RFID) integrated with building information model (BIM) for open-building life cycle information management. Proceedings of the 28th ISARC, pp. 485-490. 10.22260/ISARC2011/0088
5
Cheng, J. C., Ma, L. Y. (2013). A BIM-based system for demolition and renovation waste estimation and planning. Waste management, 33(6), pp. 1539-1551. 10.1016/j.wasman.2013.01.00123490358
6
Cheng, C., Lei, Y. (2021). Application research of radio frequency identification technology in civil engineering. Journal of Xi’an University of Architecture and Technology (Natural Science Edition) (04), pp. 611-616.
7
Ding, Z., Liu, R., Yuan, H. (2021). A text mining-based thematic model for analyzing construction and demolition waste management studies. Environmental Science and Pollution Research, pp. 1-29. 10.1007/s11356-021-13989-133905057
8
Darko, A., Chan, A. P., Yang, Y., Tetteh, M. O. (2020). Building information modeling (BIM)-based modular integrated construction risk management-Critical survey and future needs. Computers in Industry, 123, p. 103327. 10.1016/j.compind.2020.103327
9
Faruqi, M. H. Z., Siddiqui, F. Z. (2020). A mini review of construction and demolition waste management in India. Waste Management & Research, 38(7), pp. 708-716. 10.1177/0734242X2091682832347194
10
Fang, Y., Cho, Y. K., Zhang, S., Perez, E. (2016). Case study of BIM and cloud-enabled real-time RFID indoor localization for construction management applications. Journal of Construction Engineering and Management, 142(7), 05016003. 10.1061/(ASCE)CO.1943-7862.0001125
11
Guo, B. H., Zou, Y., Fang, Y., Goh, Y. M., Zou, P. X. (2021). Computer vision technologies for safety science and management in construction: a critical review and future research directions. Safety science, 135, pp. 105130. 10.1016/j.ssci.2020.105130
12
Guo, C. J., TAO, Y. H., Xin, N. Y., Wang, H. S., DUAN, Y. N. (2020). Construction personnel, equipment and cost management based on RFID technology and BIM technology.
13
Ghaffar, S. H., Burman, M., Braimah, N. (2020). Pathways to circular construction: An integrated management of construction and demolition waste for resource recovery. Journal of cleaner production, 244, pp. 118710. 10.1016/j.jclepro.2019.118710
14
Hao, J., Di Maria, F., Chen, Z., Yu, S., Ma, W., Di Sarno, L. (2020). COMPARATIVE STUDY OF ON-SITE SORTING FOR CDW IN CHINA AND EUROPE. Volume 13 - December 2020, (13), pp. 114-121. 10.31025/2611-4135/2020.14029
15
Huang, B., Wang, X., Kua, H., Geng, Y., Bleischwitz, R., Ren, J. (2018). Construction and demolition waste management in China through the 3R principle. Resources, Conservation and Recycling, 129, pp. 36-44. 10.1016/j.resconrec.2017.09.029
16
Hui, Z. Y. (2020). Research on information integration application of prefabricated building construction stage based on BIM-RFID. (Doctoral dissertation, Inner Mongolia University of Science and Technology).
17
Hoang, N. H., Ishigaki, T., Kubota, R., Yamada, M., Kawamoto, K. (2020). A review of construction and demolition waste management in Southeast Asia. Journal of Material Cycles and Waste Management, 22(2), pp. 315-325. 10.1007/s10163-019-00914-5
18
Hu, B., Zhou, L. (2021). Research on collaborative management of prefabricated buildings based on BIM+ Internet of Things technology. Gansu Science and Technology (13), pp. 101-103.
19
Jin, R., Yuan, H., Chen, Q. (2019). Science mapping approach to assisting the review of construction and demolition waste management research published between 2009 and 2018. Resources, Conservation and Recycling, 140, pp. 175-188. 10.1016/j.resconrec.2018.09.029
20
Jaillon, L., Poon, C. S., Chiang, Y. H. (2009). Quantifying the waste reduction potential of using prefabrication in building construction in Hong Kong. Waste management, 29(1), pp. 309-320. 10.1016/j.wasman.2008.02.01518434128
21
Kim, Y. C., Hong, W. H., Park, J. W., Cha, G. W. (2017). An estimation framework for building information modeling (BIM)-based demolition waste by type. Waste Management & Research, 35(12), pp. 1285-1295. 10.1177/0734242X1773638129076777
22
Korean Statistics Office https://kostat.go.kr/portal/korea/index.action.
23
Kim, M. K., Cheng, J. C., Sohn, H., Chang, C. C. (2015). A framework for dimensional and surface quality assessment of precast concrete elements using BIM and 3D laser scanning. Automation in Construction, 49, oo. 225-238. 10.1016/j.autcon.2014.07.010
24
Lu, W., Webster, C., Chen, K., Zhang, X., Chen, X. (2017). Computational Building Information Modelling for construction waste management: Moving from rhetoric to reality. Renewable and Sustainable Energy Reviews, 68, pp. 587-595. 10.1016/j.rser.2016.10.029
25
Liu, X. Y., Liang, T. (2017). Research on the key technology of bim component standardization based on revit. China Standardization, 000(004), p. 36.
26
Liu, Q. (2020). Application Research on Construction Safety Management of BIM and RFID Technology Integration (Master’s Thesis, Changchun Institute of Technology)
27
Li, C. Z., Xue, F., Li, X., Hong, J., Shen, G. Q. (2018). An Internet of Things-enabled BIM platform for on-site assembly services in prefabricated construction. Automation in construction, 89, pp. 146-161. 10.1016/j.autcon.2018.01.001
28
Lv, H., Li, Y., Yan, H. B., Wu, D., Shi, G., Xu, Q. (2021). Examining construction waste management policies in mainland China for potential performance improvements. Clean Technologies and Environmental Policy, 23(2), pp. 445-462. 10.1007/s10098-020-01984-y
29
Menegaki, M., Damigos, D. (2018). A review on current situation and challenges of construction and demolition waste management. Current Opinion in Green and Sustainable Chemistry, 13, pp. 8-15. 10.1016/j.cogsc.2018.02.010
30
Meadati, P., Irizarry, J., Akhnoukh, A. K. (2010). BIM and RFID integration: a pilot study. Advancing and integrating construction education, research and practice, 5(4), pp. 570-578.
31
Ngai, E. W. T., Moon, K. K., Riggins, F. J., Candace, Y. Y. (2008). RFID research: An academic literature review (1995-2005) and future research directions. International Journal of Production Economics, 112(2), pp. 510-520. 10.1016/j.ijpe.2007.05.004
32
Osmani, M. (2012). Construction waste minimization in the UK: current pressures for change and approaches. Procedia-Social and Behavioral Sciences, 40, pp. 37-40. 10.1016/j.sbspro.2012.03.158
33
Pellegrini, L., Campi, S., Locatelli, M., Pattini, G., Di Giuda, G. M., Tagliabue, L. C. (2020). Digital Transition and Waste Management in Architecture, Engineering, Construction, and Operations Industry. Frontiers in Energy Research, 8, p. 282. 10.3389/fenrg.2020.576462
34
Son, C. S., Kim, K. H., Lee, Y. S., Kim, K. H., Kim, J. J. (2008). The study of RFID application for efficient management in construction waste. Korean Academy of Architecture, 28(1), pp. 645-648.
35
Territorio Nacional Daily News http://www.ikld.kr (May. 30. 2016).
36
The Guardian News https://www.theguardian.com/ (Jan. 13. 2020).
37
Tao, F., Fan, T., Lai, K. K., Li, L. (2017). Impact of RFID technology on inventory control policy. Journal of the Operational Research Society, 68(2), pp. 207-220. 10.1057/s41274-016-0030-5
38
Tian, H. J., Shuang, Q. (2018). High-rise building construction safety management model using BIM and RFID technology. Project Management Technology (07), pp. 13-17.
39
Ustundag, A., Tanyas, M. (2009). The impacts of radio frequency identification (RFID) technology on supply chain costs. Transportation Research Part E: Logistics and Transportation Review, 45(1), 29-38. 10.1016/j.tre.2008.09.001
40
Van Tuan, N., Kien, T. T., Huyen, D. T. T., Nga, T. T. V., Giang, N. H., Dung, N. T., Kawamoto, K. (2018). Current status of construction and demolition waste management in Vietnam: Challenges and opportunities. GEOMATE Journal, 15(52), pp. 23-29. 10.21660/2018.52.7194
41
Wu, Z., Yu, A. T., Poon, C. S. (2020). Promoting effective construction and demolition waste management towards sustainable development: A case study of Hong Kong. Sustainable Development, 28(6), pp. 1713-1724. 10.1002/sd.2119
42
Wu, Z., Ann, T. W., Shen, L., Liu, G. (2014). Quantifying construction and demolition waste: An analytical review. Waste management, 34(9), pp. 1683-1692. 10.1016/j.wasman.2014.05.01024970618
43
Wan, L., Bai, Y. (2020). Research on the Integrated Application Value of BIM Technology and Internet of Things Technology in Building Flow Management. Project Management Technology (10), pp. 38-42.
44
Wang, J. Y., Kang, X. P., Shen, L. Y., Tan, Y. E. (2004). Research on management measures for construction waste reduction. Construction technology.
45
Wang, L. C. (2008). Enhancing construction quality inspection and management using RFID technology. Automation in construction, 17(4), pp. 467-479. 10.1016/j.autcon.2007.08.005
46
Wu, J., Wang, D., Sheng, HA. (2022). How RFID Will Impact Supply Chain Networks. 2005 IEEE International Engineering Management Conference, pp. 231-235
47
Won, J., Cheng, J. C., Lee, G. (2016). Quantification of construction waste prevented by BIM-based design validation: Case studies in South Korea. Waste Management, 49, pp. 170-180. 10.1016/j.wasman.2015.12.02626754615
48
Xue, F., Chen, K., Lu, W., Niu, Y., Huang, G. Q. (2018). Linking radio-frequency identification to Building Information Modeling: Status quo, development trajectory and guidelines for practitioners. Automation in Construction, 93, pp. 241-251. 10.1016/j.autcon.2018.05.023
49
Youcai Z., Sheng H (2017). Pollution Control and Resource Recovery: Industrial Construction and Demolition Wastes. 1st edn. Oxford: Elsevier Inc. 10.1016/B978-0-12-811754-5.00001-4
50
Yin, S. Y., Tserng, H. P., Wang, J. C., Tsai, S. C. (2009). Developing a precast production management system using RFID technology. Automation in construction, 18(5), pp. 677-691. 10.1016/j.autcon.2009.02.004
51
Yang, D. P., Yang, J. T. (2020). Research on the application of BIM technology and RFID technology in prefabricated buildings. Architecture and Budget (10), pp. 5-7.
Information
  • Publisher :Journal of KIBIM
  • Publisher(Ko) :한국BIM학회
  • Journal Title :Journal of KIBIM
  • Journal Title(Ko) :한국BIM학회논문집
  • Volume : 12
  • No :2
  • Pages :26-39
  • Received Date : 2022-03-15
  • Revised Date : 2022-04-13
  • Accepted Date : 2022-04-14
  • DOI :https://doi.org/10.13161/kibim.2022.12.2.026
Journal Informaiton Journal of KIBIM Journal of KIBIM
Online Submission
Archives
: Vol.1, 2011 ~
  • NRF
  • KOFST
  • KISTI Current Status
  • KISTI Cited-by
  • KCI 문헌 유사도 검사
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close